Welcome to the official website of Jiangyin Shenglite new energy Co., Ltd.

NEWS CENTER

86-510-86570886

495187078@qq.com

No. 86 Renmin Road, Qiqi Industrial Park, Xu Xiake Town, Jiangyin, Jiangsu Province, China

Home page

Whether photovoltaic glass belongs to flat glass

Sep 30,2022

Author:

Photovoltaic glass is a kind of flat glass, I think so.

Photovoltaic glass belongs to soda lime silicate glass. The difference between it and ordinary flat glass is that the requirements for transmissivity are much higher. In the production process, the content of iron, the main coloring element, should be very low. There are certain requirements for glass defects. There are also requirements for the embossing roller required for glass forming. These measures are to improve the transmissivity of glass. The rest of the glass composition is basically within the range of flat glass composition. It can be said that photovoltaic glass is a higher level glass variety in flat glass!

The reason why photovoltaic glass has developed so rapidly in recent years is mainly because it can be produced by improving the flat glass. The technical requirements for photovoltaic glass production are not high, which leads to this result.

More News

What process is used to make solar photovoltaic glass?

Sep 30,2022

First, weigh the glass raw materials according to the formula requirements, and then mix them evenly. Then, use the feeder to put the batch into the glass furnace. By controlling the temperature in the glass furnace, the batch can be melted at a high temperature of about 1600 ℃. Control certain temperature requirements to make the glass complete the process of clarification, homogenization, cooling, etc., and then make the glass by calendering or float molding. It is mainly to control the iron content in the process of batching, melting and molding, so that the transmissivity of the glass can reach 91.6%, and the defects should be lower than a certain requirement.

How thick is photovoltaic glass used for solar energy?

Sep 30,2022

Generally, glass with a thickness of 3.2cm is used. (3.2cm/4cm/) The strength is tested under certain conditions: 227 grams of steel balls fall freely at a height of 1 meter, and the glass does not break Generally speaking, the light transmittance can reach 91% as long as the photovoltaic glass is professionally produced The steel degree you mentioned is also obtained under certain operation: more than 40 grains within the range of 50 * 50 are qualified

Mobile website

Tel: 86-510-86570886
Fax: 86-0510-86578082
E-mail：495187078@qq.com

Add: No. 86 Renmin Road, Qiqi Industrial Park,

Xu Xiake Town, Jiangyin, Jiangsu Province, China

Power by 300.cn | SEO